The 9 PCD chip grinding cup wheel is designed for fast removing hard and tacky surface coating including urethane epoxy, paint, glue, ,waterproofing membrane,pool deck coating, thick mastic, old and new epoxy coating,VCT mastic, black tar adhesive as well as thick rubber materials on the concrete floor.
Diamond grinding pucks / dics are designed for all purpose grinding on a wide range of substrates, a great choice for grinding concrete, as well as terrazzo, stone, self-leveling and overlay floors. Terrco metal bond pucks feature a unique, super thick metal bond that offers a smooth scratch pattern and long diamond life.
Fast removal of thick coating such as old glue, epoxy, paint, in particular thick resins.
Creates slip-resistant finish on granite and marble, breaks down coatings prepares surface for application of new coating overlay, enhances the combination of floor and new layer material.
Redi-Lock with Two Half PCDs and Two Buttons is a “high-stability” configuration designed for precision removal of coatings. This setup is a step up in control from the 2 Half PCD + 1 Bar/Button version, offering even more balance and protection for the concrete surface.
Diamond beveled grinding pucks / disc helps achieve smoother transitions during grinding, reduces scratches, and is applicable for processing linear edges, chamfers, and irregularly shaped stones 3 inch 76mm concrete removal tools
Email：
contact@hldiamondtools.com
metal bond grinding pucks size : 3″=76mm
Segment:5T,6T,8T,10T Or customized as requested
Segment height: 6/8/10/12mm or upon request
Grit: 6#, 16/20#, 30/40#, 60/80#, 120# grit or made as your demand
Bonds Available:Extreme soft /Soft/ Medium/ Hard/ Extreme hard Or customized as requested
Backing system: Fast Change System
Working type: Wet grinding / Dry grinding
Long lifetime
Aggressive Grinding Plate Main Uses:
1.Concrete and Stone Surface Treatment: Primarily used for grinding, leveling, surface pre-treatment, and renovation of concrete floors in industrial facilities, parking lots, warehouses, etc.
2.Coating Removal: Effectively removes old paint, epoxy resin, adhesive residue, and rust from concrete surfaces.
3.Hard Material Processing: Suitable for grinding and polishing hard or brittle materials such as granite, marble, tiles, hard alloys, ceramics, and glass.
4.Edge and Irregular Shape Processing: .
Diamond Grinding Wheel Features:
1.Material: Composed of high-quality diamond abrasive bonded with metal powders (such as bronze, cobalt, iron alloys) through sintering, offering ultra-high hardness and wear resistance.
2.Design: Equipped with 6 or more segmented grinding blocks. This segmented design facilitates optimal chip and slurry discharge during dry or wet grinding, reducing heat accumulation.
3.Durability: Compared to traditional abrasives, diamond grinding discs have a longer service life, significantly improving processing efficiency and reducing long-term operating costs.
4.Applicable Equipment: Typically installed on angle grinders or dedicated floor grinders for use.
Note：Please leave your email, our professional person will contact you asap!
Keywords: CW505、CW507、Class B water mill、7-inch turbine 30
