Lavina PCD grinding shoes for epoxy coating
Huanlong makes a series of diamond and PCD grinding shoes for Lavina, this 1/2 PCD is easy to remove epoxy coating, paints, glue and similar floor surface, it is faster and longer lifespan than diamond grinding shoes.
Double Rhombus Diamond Grinding Segments are mainly used for smoothing, refurbishing and surface pre-treatment of concrete or stone floors.This shape can effectively penetrate hard surfaces and enhance the grinding efficiency.
The 7 inch Air cool 6 PCD segments diamond grinding cup wheel is designed for fast removing hard and tacky surface coating including urethane epoxy, paint, glue, ,waterproofing membrane,pool deck coating, thick mastic, old and new epoxy coating,VCT mastic, black tar adhesive as well as thick rubber materials on the concrete floor.
Fast removal of thick coating such as old glue, epoxy, paint, in particular thick resins.
Creates slip-resistant finish on granite and marble, breaks down coatings prepares surface for application of new coating overlay, enhances the combination of floor and new layer material.
Diamond beveled grinding pucks / disc helps achieve smoother transitions during grinding, reduces scratches, and is applicable for processing linear edges, chamfers, and irregularly shaped stones 3 inch 76mm concrete removal tools
Email：
contact@hldiamondtools.com
metal bond grinding pucks size : 3″=76mm
Segment:5T,6T,8T,10T Or customized as requested
Segment height: 6/8/10/12mm or upon request
Grit: 6#, 16/20#, 30/40#, 60/80#, 120# grit or made as your demand
Bonds Available:Extreme soft /Soft/ Medium/ Hard/ Extreme hard Or customized as requested
Backing system: Fast Change System
Working type: Wet grinding / Dry grinding
Long lifetime
Aggressive Grinding Plate Main Uses:
1.Concrete and Stone Surface Treatment: Primarily used for grinding, leveling, surface pre-treatment, and renovation of concrete floors in industrial facilities, parking lots, warehouses, etc.
2.Coating Removal: Effectively removes old paint, epoxy resin, adhesive residue, and rust from concrete surfaces.
3.Hard Material Processing: Suitable for grinding and polishing hard or brittle materials such as granite, marble, tiles, hard alloys, ceramics, and glass.
4.Edge and Irregular Shape Processing: .
Diamond Grinding Wheel Features:
1.Material: Composed of high-quality diamond abrasive bonded with metal powders (such as bronze, cobalt, iron alloys) through sintering, offering ultra-high hardness and wear resistance.
2.Design: Equipped with 6 or more segmented grinding blocks. This segmented design facilitates optimal chip and slurry discharge during dry or wet grinding, reducing heat accumulation.
3.Durability: Compared to traditional abrasives, diamond grinding discs have a longer service life, significantly improving processing efficiency and reducing long-term operating costs.
4.Applicable Equipment: Typically installed on angle grinders or dedicated floor grinders for use.
Note：Please leave your email, our professional person will contact you asap!
Keywords: CW505、CW507、Class B water mill、7-inch turbine 30
