Edge Polshing Pads Diamond polishing pads With Snail Lock Resin Snail Lock Polishing Pads for In-line Flat Edge Wet Polishing
The Snail Lock Polishing Pads or Granite Polishing Discs have been engineered to eliminate workpiece end scratches and polish flat edges with a premium finish and quick, high-quality results.Available in Grit 50, 100, 200, 400, 800, 1500, and 3000
The grinding wheel is characterised by a flawless quality at a very high diamond concentration. It allows for quick and cool sanding with a clean sanding pattern. The disc is particularly used on industrial floors, preparation of concrete floors and in the preparation of new coatings, for the removal of old coatings or coverings.
Diamond Grinder Quick Change Adaptor Plate is designed to connect various diamond grinding blocks or grinding discs to bottom-uncompatible concrete grinding machines.
Velcro adaptor for floor polishing pad for easy installation of velcro back resin floor polishing pad onto floor grinding machine. Eg: REDILOCK, LAVINA, HTC, SKINMAKIN, SWITCH, STI, etc.
Huanlong three colors Wet diamond polishing pad is a premium quality diamond polishing pad for fast Wet polishing materials such as Granite, marble, Terrazzo, concrete, Engineered Stone, Porcelain, Quartz.
Maximum 4000RPM
Mesh size: 50#, 100#, 200#, 400#, 800#, 1500#, 3000#, buff.
Email：
contact@hldiamondtools.com
Huanlong Three Colors Premium Wet Diamond Polishing pad
Application: Huanlong three colors Wet diamond polishing pad is a premium quality diamond polishing pad for fast polishing materials such as Granite, marble, Terrazzo, concrete, Engineered Stone, Porcelain, Quartz.. Only use High quality diamond powder and resin powder, make this polishing pad is perfect choice for fast & smooth wet polishing.
1. High quality diamond powder and high diamond concentration, make this pads’ polishing efficiency is faster compare to common polishing pad upon the market.
2. High end polishing result, glossness can be achieved higher than 95 after full steps Polishing.
3. High-quality nylon velcro back, adhesion is great and easy to attached onto backers, not easy to be damaged during high speed polishing process.
4.The back color of each pad is corresponding to grit/mesh size, esay to identify the grit during working process.
5. Available diameter: 100mm/125mm/150mm/180mm or upon request.
6.Logo can be customized as required.
Please be Noted:
1. For Wet polishing Only
2. Please use Hand hold Polishing Machine Only. The speed of machine must less 4500 RPM,The pressure must less 3kgs/cm2
2. The actual color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness
Note：Please leave your email, our professional person will contact you asap!
Keywords: CW505、CW507、Class B water mill、7-inch turbine 30
