The Redi-Lock 1/2 PCD with Wear Bar is a specialized concrete grinding tool designed for the aggressive removal of surface coatings. It is most commonly used with Husqvarna floor grinders or machines equipped with a Redi-Lock compatible mounting plate.
The 180mm 9 PCD Low profile grinding cup wheel is designed for fast removing hard and tacky surface coating including urethane epoxy, paint, glue, ,waterproofing membrane,pool deck coating, thick mastic,VCT mastic, black tar adhesive, old and new epoxy coating, as well as thick rubber materials on the concrete floor.
SASE PCD with 5×1/4 segments is a specialized concrete grinding tool designed for aggressive coating removal. It features five “quarter-round” Polycrystalline Diamond (PCD) chunks mounted on a plate, typically using the SASE Quick Change (QC) attachment system.
Redi-Lock with Two Half PCDs and Two Buttons is a “high-stability” configuration designed for precision removal of coatings. This setup is a step up in control from the 2 Half PCD + 1 Bar/Button version, offering even more balance and protection for the concrete surface.
Huanlong three colors Wet diamond polishing pad is a premium quality diamond polishing pad for fast Wet polishing materials such as Granite, marble, Terrazzo, concrete, Engineered Stone, Porcelain, Quartz.
Maximum 4000RPM
Mesh size: 50#, 100#, 200#, 400#, 800#, 1500#, 3000#, buff.
Email：
contact@hldiamondtools.com
Huanlong Three Colors Premium Wet Diamond Polishing pad
Application: Huanlong three colors Wet diamond polishing pad is a premium quality diamond polishing pad for fast polishing materials such as Granite, marble, Terrazzo, concrete, Engineered Stone, Porcelain, Quartz.. Only use High quality diamond powder and resin powder, make this polishing pad is perfect choice for fast & smooth wet polishing.
1. High quality diamond powder and high diamond concentration, make this pads’ polishing efficiency is faster compare to common polishing pad upon the market.
2. High end polishing result, glossness can be achieved higher than 95 after full steps Polishing.
3. High-quality nylon velcro back, adhesion is great and easy to attached onto backers, not easy to be damaged during high speed polishing process.
4.The back color of each pad is corresponding to grit/mesh size, esay to identify the grit during working process.
5. Available diameter: 100mm/125mm/150mm/180mm or upon request.
6.Logo can be customized as required.
Please be Noted:
1. For Wet polishing Only
2. Please use Hand hold Polishing Machine Only. The speed of machine must less 4500 RPM,The pressure must less 3kgs/cm2
2. The actual color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness
Note：Please leave your email, our professional person will contact you asap!
Keywords: CW505、CW507、Class B water mill、7-inch turbine 30
