“PCD Plug WITH 3 PCDs are designed to remove coating over a surface equal to a troweled surface and will not damage the concrete. One of the 3 PCDs act as a stabilizer and depth guide, and reduce the gauging of the floor caused by the aggressive pcd segments. Diamond plug for Floorex grinder, with different shapes segments. But what is more important, especially in the initial grinding steps, is the bond or hardness of the tools. “
The 7inch 6 PCD segments diamond grinding cup wheel is designed for fast removing hard and tacky surface coating including urethane epoxy, paint, glue, ,waterproofing membrane,pool deck coating, thick mastic, old and new epoxy coating,VCT mastic, black tar adhesive as well as thick rubber materials on the concrete floor.
Huanlong 2 Arrow segments Lavina grinding shoesare specifically designed for high-efficiency floor prep and aggressive coating removal.
Double Bigger Square Diamond Grinding Segments are mainly used for smoothing, refurbishing and surface pre-treatment of concrete or stone floors.This shape can effectively penetrate hard surfaces and enhance the grinding efficiency.
Huanlong Honeycomb Dry diamond polishing pad is a premium quality diamond polishing pad for fast Dry polishing materials such as Granite, marble, Terrazzo, concrete, Engineered Stone, Porcelain, Quartz.
Maximum 4000RPM
Mesh size: 50#, 100#, 200#, 400#, 800#, 1500#, 3000#, buff.
Email：
contact@hldiamondtools.com
Huanlong Premium Honeycomb Dry Diamond Polishing pad
Application: Huanlong Premium Honeycomb Dry Diamond Polishing pad is a premium quality diamond polishing pad for fast polishing materials such as Granite, marble, Terrazzo, concrete, Engineered Stone, Porcelain, Quartz.. Only use High quality diamond powder and resin powder, make this polishing pad is perfect choice for fast & smooth Dry polishing.
1. High quality diamond powder and high diamond concentration, make this pads’ polishing efficiency is faster compare to common polishing pad upon the market.
2. High end polishing result, glossness can be achieved higher than 95 after full steps Polishing.
3. High-quality nylon velcro back, adhesion is great and easy to attached onto backers, not easy to be damaged during high speed polishing process.
4.The back color of each pad is corresponding to grit/mesh size, esay to identify the grit during working process.
5. Available diameter: 100mm/125mm/150mm/180mm or upon request.
6.Logo can be customized as required.
Please be Noted:
1. Please use Hand hold Polishing Machine Only. The speed of machine must less 4500 RPM,The pressure must less 3kgs/cm2
Note：Please leave your email, our professional person will contact you asap!
Keywords: CW505、CW507、Class B water mill、7-inch turbine 30
