LAVINA 3×1/2 PCD refers to a type of concrete floor grinding tool, specifically a diamond segment with 3 pieces of half-round Polycrystalline Diamond (PCD) on a Lavina-compatible metal blank, used for aggressively removing thick coatings like epoxy, glue, and mastic from concrete floors
PCD grinding puck is designed for concrete floor coating removals, thick old coatings removal such as epoxies, glues, mastic, urethane etc. PCD Rotation available in both clockwise or counter-clockwise versions.
PCD is very sharp; it is designed for quick removal of thick coatings during 3~5mm, such as paint, epoxy, glue from concrete floors. The alloy and protection segments can help the residual coatings left behind, as well as reducing scratches and protecting the pcd segments.
Fast removal of thick coating such as old glue, epoxy, paint, in particular thick resins.
Creates slip-resistant finish on granite and marble, breaks down coatings prepares surface for application of new coating overlay, enhances the combination of floor and new layer material.
Huanlong 5 stpes Wet diamond polishing pad for fast Wet polishing materials such as Granite, marble, Terrazzo, concrete, Engineered Stone, Porcelain, Quartz.
Maximum 4000RPM
Email：
contact@hldiamondtools.com
Huanlong 5 step Snowflake Wet Diamond Polishing pad
Application: Huanlong 5 steps Wet diamond polishing pad is a high quality diamond polishing pad for wet polishing materials such as Granite, marble, Terrazzo, concrete, Engineered Stone, Porcelain, Quartz.. It is an ideal choice for fast & smooth wet polishing.
1. High quality diamond powder for fast polishing efficiency
2. Only need 5 step pads can achieve high glossness polishing result, greatly improve working effeciency.
3. High-quality nylon velcro back, adhesion is great and easy to attached onto backers, not easy to be damaged during high speed polishing process.
4.The back color of each pad is corresponding to grit/mesh size, esay to identify the grit during working process.
5. Available diameter: 100mm/125mm/150mm/180mm or upon request.
6.Logo can be customized as required.
Please be Noted:
1. For Wet polishing Only
2. Please use Hand hold Polishing Machine Only. The speed of machine must less 4500 RPM,The pressure must less 3kgs/cm2
Note：Please leave your email, our professional person will contact you asap!
Keywords: CW505、CW507、Class B water mill、7-inch turbine 30
