Single Pin grinding shoes is preferred for its balance between aggressive cutting and a smooth finish, have high strength, excellent wear resistance, and a low friction coefficient. Metal bond diamonds high grinding efficiency and low wear.
PRODUCTS
HOT PRODUCTS
Polar Magnetic Fittiing Diamond Trapezoid Single Button Segment Grinding Disc are less aggressive and leave a more subtle scratch pattern, using round segments often makes for an easier transition into resin polishing pads.
The Redi-Lock with 1/2 PCD and 2 Arrow Segments is an elite heavy-duty removal tool. It combines the raw scraping power of a half-round PCD with the precision “slicing” of arrow-shaped diamond segments. This is a specialized configuration typically used when you need to strip a thick, stubborn coating and prep the concrete for a new high-build system in a single pass.
Huanlong premium Metal Bond Diamond Polishing Pad, Metal chip bond into resin diamond polishing pad, Super abrasive for super fast polishing concrete & stone surface.
Excellent Husqvarna 2 Full PCDs With Cylinder metal bond Grinding Shoes for Coating Removal Premium Concrete Removal Tools for Floor Grinding Machines
Redi-Lock with Two Full PCDs and One Cylinder Metal Bond is a heavy-duty, hybrid tool optimized for the rapid removal of thick, stubborn coatings while maintaining strict control over the grinding depth. In this setup, the “cylinder” acts as a high-durability stabilizer that is more robust than a standard flat bar or button.
Email：
contact@hldiamondtools.com
Excellent Full PCD grinding shoes for aggressive removal of all kinds of floor coatings, such as epoxy, glue, paint, varnish, mastic, adhesives, and more. Ideal for surface preparation and coating removal projects.
PCD Types: Full Round x 2 pieces
These are the primary “cutters.” Large, solid polycrystalline diamond blocks that are designed to fracture and peel off thick layers of epoxy, polyurethane, or heavy mastics.
Cylinder metal bond provides a smaller footprint than a bar but more vertical wear material than a button. It acts as a structural pillar that supports the machine’s weight, preventing the PCDs from “digging in” or gouging the concrete.
It is available to customize both clockwise and counterclockwise PCD diamond segments.
Best Applications
This specific tool is a “go-to” for the following scenarios:
• Thick, Brittle Coatings: Removing thick epoxy (3mm+) or high-build self-leveling compounds where you need maximum downward pressure.
• Sticky/Elastic Membranes: The cylinder helps keep the tool at a fixed height even when working on rubberized waterproofing membranes that might otherwise “pull” a standard shoe into the floor.
• Uneven Slabs: The cylindrical shape handles floor undulations better than a long bar, as it has a smaller surface area and is less likely to get hung up on high spots.
Note：Please leave your email, our professional person will contact you asap!
