“For easy installation of velcro back resin floor polishing pad onto floor grinding machine. Eg: REDILOCK, LAVINA, HTC, SKINMAKIN, SWITCH, STI, etc. 1) Diameter: Trapzoid 2) Back: redi lock 3) Connection: Magnetic or M6 thread 4) Color: Black”
PRODUCTS
HOT PRODUCTS
Huanlong 1 Large Rhombus segments Redilock grinding shoes are specifically designed for high-efficiency floor prep and aggressive coating removal.
HTC single bar grinding shoes are more aggressive compared to their double-segment plate. Because the machine’s entire weight is concentrated on half the surface area (one bar instead of two), they bite significantly deeper into the concrete and best for lighter machines.
Bolt-on Style 3×1/2 PCD refers to a type of concrete floor grinding tool, specifically a diamond segment with 3 pieces of half-round Polycrystalline Diamond (PCD) on a plate metal blank, used for aggressively removing thick coatings like epoxy, glue, and mastic from concrete floors
Lavina Double PCD with Single Bar Segment for Epoxy Removing
Lavina X PCD with bar are designed for thin mil coating removal, mastic removal, and for the first steps in polishing. Beveled tooling that allows for easy ‘slide in’ action on your concrete grinders. These tools are universal to 3 pin screw systems as well. PCD’s are typically used to remove prior coatings and glue.
Email：
contact@hldiamondtools.com
Epoxy PCD Metal Bond Diamond Tool for Concrete Coating Removal Lavina Grinder
HuanLong PCD grinding shoes are used for fast removing all types of coatings such as paint, varnish, glue, epoxy, acrylic, screed residue, VCT mastic, black tar adhesive as well as thick rubber materials on the concrete floor. Redi Lock is easy and quick set up of diamond tools, no need for multiple sets of diamond holder discs and no time consuming. Available for a variety of machine manufacturers.
About Segments:
a.PCD without sacrificial bars or metal bond button are very aggressive, and will leave a very coarse profile on the concrete. They are suitable for fast and aggressive grinding, removal coating thicker than 3mm.
b.PCD with sacrificial bars or metal bond button are less aggressive, so they do not damage the concrete.The sacrificial bars or metal bond button act as a depth guide, and reduce the gauging of the floor cause by the aggressive PCD segments. Moreover, the metal bond will extend the life of PCD.
Working type: Dry grinding / Wet grinding
HuanLong can offer all kinds of trapezoid PCD to fit all types of machines. The universal three holes fit most plates. (Please contact us for options and details.)
Note: The PCD coating removal tool is directional specific and you should check the rotation direction of the grinder heads.
Note：Please leave your email, our professional person will contact you asap!
