PCD grinding puck is designed for concrete floor coating removals, thick old coatings removal such as epoxies, glues, mastic, urethane etc. PCD Rotation available in both clockwise or counter-clockwise versions.
PRODUCTS
HOT PRODUCTS
Fast removal of thick coating such as old glue, epoxy, paint, in particular thick resins.
Creates slip-resistant finish on granite and marble, breaks down coatings prepares surface for application of new coating overlay, enhances the combination of floor and new layer material.
Fast removal of thick coating such as old glue, epoxy, paint, in particular thick resins.
Creates slip-resistant finish on granite and marble, breaks down coatings prepares surface for application of new coating overlay, enhances the combination of floor and new layer material.
3×1/4PCD Diamond Trapezoid Grinding Disc Excellent for all kinds of hard-to-remove coatings, adhesives and screeds, such as epoxy, glues and paint. Suitable for Iron Horse, Xingyi, ASL Floor Grinder
Schwamborn Double Half PCDs Ideal for polyurethane, acrylics, and epoxy coatings that aren’t excessively thick. 2X1/2 Polycrystalline Diamond
Schwamborn PCD grinding shoes are specialized surface preparation tools designed for the aggressive removal of stubborn floor coatings. Unlike standard metal-bond diamond segments that “grind” the surface, PCD tools use a “scraping” or “tearing” action, which prevents the tools from gumming up or overheating when dealing with thick, sticky materials.
Email：
contact@hldiamondtools.com
Schwamborn with two half-round (split) Polycrystalline Diamond segments 2 x 1/2 PCD less aggressive than a full-round PCD but more efficient than a standard metal-bond diamond for removing stubborn materials.
Application
1. Medium Coating Removal: Ideal for polyurethane, acrylics, and epoxy coatings that aren’t excessively thick.
2. Adhesive Residue: Excellent for scraping up carpet glue, VCT mastic, and bitumen that hasn’t hardened into a rock-like state.
3. Corrective Grinding: Used when the surface is too “gummy” for 16-grit metal bonds but you don’t want the destructive power of a full PCD.
4. Keying the Surface: Leaves a perfect “key” (CSP 3–5) for new coatings to bond to, often saving you a secondary grinding step with coarse metal bonds.
Note：Please leave your email, our professional person will contact you asap!
