“PCD grinding plates are used for fast removing all types of coatings such as paint, varnish, glue, epoxy, acrylic, screed residue, VCT mastic, black tar adhesive as well as thick rubber materials on the concrete floor. “
PRODUCTS
HOT PRODUCTS
Huanlong PCD grinding plates are used for fast removing all types of coatings such as paint, varnish, glue, epoxy, acrylic, screed residue, VCT mastic, black tar adhesive as well as thick rubber materials on the concrete floor.
Lavina Diamond Tools with 2 Quartz Round PCD Segments and 2 Sacrificial Bars PCD Grinding Plate is very sharp; it is designed for quick removal of coatings, such as paint, epoxy, glue from concrete floors as well as flattening bumpy concrete surface.
Scanmaskin PCD shoes to provide high performance, long lifespan, and consistent results on any surface, our tools are available in various grit sizes and hardness levels to accommodate different concrete types and grinding tasks.
Scanmaskin Grinding Pads 2 x Rhombus Segments metal bond Used for grinding, leveling concrete, terrazzo, and stone floor surfaces. 20x12x12mm
Double Rhombus Diamond Grinding Segments are mainly used for smoothing, refurbishing and surface pre-treatment of concrete or stone floors.This shape can effectively penetrate hard surfaces and enhance the grinding efficiency.
Email：
contact@hldiamondtools.com
Trapezoid Scanmaskin grinding tools with double Rhombus egments are high-performance diamond tools designed for sliding into the scanmaskin holder, specializing in fast grinding of concrete, leveling, and removing coatings like epoxy or glue. Featuring two bar-shaped segments, they offer efficient, long-lasting performance, available in various bonds (super soft to hard) for different concrete hardness levels.
Type: Scanmaskin Diamond Grinding Block / Grinding Disc
Compatible machines: Specifically designed for Scanmaskin floor grinding machines, it allows for quick replacement without the need for screw fixation.
Usage: Mainly used for grinding and polishing of concrete, terrazzo and stone floors. It can also be used to remove old epoxy resins, glues and paint coatings.
Grinding grit (Grit): available in 16#, 20#, 30#, 40#, 60#, 80#, 120#, and 200#.
Features:
It has excellent wear resistance, high strength and low friction coefficient.
The segmented design double Rhombus segments helps to improve grinding efficiency.
It can be used for dry or wet grinding, and has a long service life.
Purpose
1. Ground leveling: Remove the uneven or elevated areas on the concrete surface.
2. Coating removal: Remove old paint, glue, epoxy resin coatings, etc.
3. Surface preparation: Before performing floor polishing or re-coating, roughen the surface of the floor to enhance adhesion.
Note：Please leave your email, our professional person will contact you asap!
