The Redi-Lock with 1/2 PCD and 2 Arrow Segments is an elite heavy-duty removal tool. It combines the raw scraping power of a half-round PCD with the precision “slicing” of arrow-shaped diamond segments. This is a specialized configuration typically used when you need to strip a thick, stubborn coating and prep the concrete for a new high-build system in a single pass.
Standard Trap Base Plate with 2 Half PCD is a specialized heavy-duty grinding tool used primarily for the removal of thick, stubborn floor coatings. In the concrete surfacing industry. Trapezoid shape of the metal base plate, which is designed to fit into the quick-change or bolt-on systems of most floor grinding machines.
“PCD Plug WITH 3 PCDs are designed to remove coating over a surface equal to a troweled surface and will not damage the concrete. One of the 3 PCDs act as a stabilizer and depth guide, and reduce the gauging of the floor caused by the aggressive pcd segments. Diamond plug for Floorex grinder, with different shapes segments. But what is more important, especially in the initial grinding steps, is the bond or hardness of the tools. “
The sharp edged PCD segments diamond grinding cup wheel is designed for fast removing hard and tacky surface coating including urethane epoxy, paint, glue, pool deck coating, waterproofing membrane, thick mastic,VCT mastic, black tar adhesive, old and new epoxy coating, as well as thick rubber materials on the concrete floor.
Fast removal of thick coating such as old glue, epoxy, paint, in particular thick resins.
Creates slip-resistant finish on granite and marble, breaks down coatings prepares surface for application of new coating overlay, enhances the combination of floor and new layer material.
Email：
contact@hldiamondtools.com
HTC Bush Hammer Plate With 6 Rollers For Concrete
HTC bush hammer plate are used for concrete, granite, marble and other stone, they are installed in hand and auto grinding machine. We can produce all kinds of long life bush hammer tools for granite and other stone.
Our 6 rollers bush hammer plates also can be used for stone surface fabricating, making bush hammered effect for stone products. It can creat slip-resistant finish one granite and marble, breaking down coatings standard diamonds can’t reach, prepares surface for application of thin-set overlay.
The repeated hit of carbide tips into stone or concrete surface creat a rough, pockmarked texture that looks like naturally weathered rock.
diamond bush hammer grinding for granite or concrete is a construction tool used for texturizing and grinding concrete and stone. Floor bush hammer plates can adapt to several kinds of grinder, from simple hand-held hammers to large electric machines, but the basic function of the regular bush hammer is always the same – 30pcs/45pcs/60pcs of conical or pyramidal carbide tips welded at the top of a large metal plate. The repeated hit of these carbide tips into stone or concrete surface creates a rough, pockmarked texture that looks like naturally weathered rock.
Bush hammer plates for concrete and stone can help to increase bonding effectiveness when applying new concrete to an existing concrete surface by increasing the surface area of the bonding zone.
Note：Please leave your email, our professional person will contact you asap!
Keywords: CW505、CW507、Class B water mill、7-inch turbine 30
