Single Pin grinding shoes is preferred for its balance between aggressive cutting and a smooth finish, have high strength, excellent wear resistance, and a low friction coefficient. Metal bond diamonds high grinding efficiency and low wear.
PRODUCTS
HOT PRODUCTS
Huanlong light weight PCD diamond grinding cup wheel is Lighter than traditional diamond cup wheel for easier hand-hold grinding process. It is perfect for fast removing hard and tacky surface coating including urethane epoxy, paint, glue, ,waterproofing membrane,pool deck coating, thick mastic, old and new epoxy coating,VCT mastic, black tar adhesive as well as thick rubber materials on the concrete floor.
PCD grinding puck is designed for concrete floor coating removals, thick old coatings removal such as epoxies, glues, mastic, urethane etc.
Redilock diamond grinding shoes/Redilock grinding shoes/Redilock Diamond grinding disc/Redilock grinding disc/Hasqvarna diamond grinding shoe/Hasqvarna grinding shoe/Terrazzo grinding shoe/Concrete grinding shoe/Trapezoid Grinding Shoes/Metal bond diamond segment/Surface preparation
The Redi-Lock with 1/2 PCD and 2 Arrow Segments For Thick, sticky coatings and hard concrete. Aggressive; deep mechanical bond profile.
The Redi-Lock with 1/2 PCD and 2 Arrow Segments is an elite heavy-duty removal tool. It combines the raw scraping power of a half-round PCD with the precision “slicing” of arrow-shaped diamond segments. This is a specialized configuration typically used when you need to strip a thick, stubborn coating and prep the concrete for a new high-build system in a single pass.
Email：
contact@hldiamondtools.com
Trapezoid Half PCD w/ Double Arrow Coating Removal PCD Diamond Grinding Segment Concrete Tools
1. The Power of the “Arrow” Design
Unlike standard rectangular bars, Arrow Segments have sharp, pointed leading edges.
Slicing Action: While a standard bar grinds, the arrow “slices” into the coating residue. This is particularly effective for sticky adhesives (mastic, glue) that might otherwise smear under a flat bar.
Reduced Friction: The tapered shape allows the segment to penetrate the surface more easily, providing a more aggressive bite into the concrete substrate.
2. Why the “1/2 PCD + 2 Arrow” Combo?
This setup is designed for heavy-duty production:
Maximum Shredding: The 1/2 PCD chip acts as the primary “shredder,” tearing through thick epoxy, urethane, or waterproof membranes.
Double Stability: Two arrow segments provide a wider footprint than a single bar. This keeps the grinding head perfectly level, preventing the machine from “walking” or vibrating excessively when hitting uneven patches.
Integrated Surface Prep: The two arrow segments are usually a very coarse grit (roughly 16–25 grit). As the PCD removes the coating, the arrows immediately begin grinding the concrete, leaving a high-profile surface that is ideal for bonding new materials.
Note：Please leave your email, our professional person will contact you asap!
