PCD grinding disc is designed for concrete floor coating removals, thick old coatings removal such as epoxies, glues, mastic, urethane etc.
PRODUCTS
HOT PRODUCTS
Lavina 2x 1/4 PCD refers to a specific type of diamond grinding tool, a PCD (Polycrystalline Diamond) shoe/segment, designed for aggressive concrete surface preparation, particularly for stripping thick coatings like epoxy, paint, glue, and mastic, compatible with Lavina grinders and other systems like EDCO and Onfloor.
Sase Removal Tools Composed Of One PCD Diamond Segment And One Bar-Shaped Segment. It is use for floor coating removal, epoxy, and paint grinding. It is widely used in many grinding applications,like removing of epoxy, glue, and resin off of concrete floor.
The HTC diamond grinding disc is specifically designed for concrete floor grinders. Used for grinding, leveling concrete, terrazzo, and stone floor surfaces.Highly efficient in removing old coatings, adhesive residues, epoxy resins, and paints, etc.
Bush Hammer Plate with 3 Rollers for Concrete
Fast removal of thick coating such as old glue, epoxy, paint, in particular thick resins.
Creates slip-resistant finish on granite and marble, breaks down coatings prepares surface for application of new coating overlay, enhances the combination of floor and new layer material.
Email：
contact@hldiamondtools.com
Bush Hammer Plate With 3 Rollers For Concrete
Designed to texturize concrete surfaces by creating a bonding effectThe repeated impact of points allows for the removal of mortar or heavy coatings, as well as preparation before a coating is appliedMore aggressive than a shot-blasterIdeal for revealing coarse aggregates on concrete surfaces
diamond bush hammer grinding for granite or concrete is a construction tool used for texturizing and grinding concrete and stone. Floor bush hammer plates can adapt to several kinds of grinder, from simple hand-held hammers to large electric machines, but the basic function of the regular bush hammer is always the same – 30pcs/45pcs/60pcs of conical or pyramidal carbide tips welded at the top of a large metal plate. The repeated hit of these carbide tips into stone or concrete surface creates a rough, pockmarked texture that looks like naturally weathered rock.
Bush hammer plates for concrete and stone can help to increase bonding effectiveness when applying new concrete to an existing concrete surface by increasing the surface area of the bonding zone.
Note：Please leave your email, our professional person will contact you asap!
