Huanlong Boomerang Segment diamond grinding cup wheel, For fast and aggresive grinding hard material such as concrete, Terrazzo, Engineered Stone, granit, marble and etc.
PRODUCTS
HOT PRODUCTS
Split-PCD diamond grinding shoes are installed on those walk-behind concrete floor grinders for use. The versatile Split PCD scrapes and rips off coatings from the surface, like 1-3mm epoxy, urethane, mastic, glue etc. The PCD tips will never load up or smear the coatings like a metal bond diamond tool.
Newgrind PCD shoes are specialized diamond grinding tools for floor preparation, featuring Polycrystalline Diamond (PCD) segments designed for aggressive removal of tough floor coatings like epoxy, glue, paint, and mastic from concrete, often used with machines like the Rhino or Lavina, known for their durability and efficiency in stripping difficult surfaces.
Huanlong Honeycomb Dry diamond polishing pad is a premium quality diamond polishing pad for fast Dry polishing materials such as Granite, marble, Terrazzo, concrete, Engineered Stone, Porcelain, Quartz.
Maximum 4000RPM
Mesh size: 50#, 100#, 200#, 400#, 800#, 1500#, 3000#, buff.
Bush Hammer Plate with 3 Rollers for Concrete
Fast removal of thick coating such as old glue, epoxy, paint, in particular thick resins.
Creates slip-resistant finish on granite and marble, breaks down coatings prepares surface for application of new coating overlay, enhances the combination of floor and new layer material.
Email：
contact@hldiamondtools.com
Bush Hammer Plate With 3 Rollers For Concrete
Designed to texturize concrete surfaces by creating a bonding effectThe repeated impact of points allows for the removal of mortar or heavy coatings, as well as preparation before a coating is appliedMore aggressive than a shot-blasterIdeal for revealing coarse aggregates on concrete surfaces
diamond bush hammer grinding for granite or concrete is a construction tool used for texturizing and grinding concrete and stone. Floor bush hammer plates can adapt to several kinds of grinder, from simple hand-held hammers to large electric machines, but the basic function of the regular bush hammer is always the same – 30pcs/45pcs/60pcs of conical or pyramidal carbide tips welded at the top of a large metal plate. The repeated hit of these carbide tips into stone or concrete surface creates a rough, pockmarked texture that looks like naturally weathered rock.
Bush hammer plates for concrete and stone can help to increase bonding effectiveness when applying new concrete to an existing concrete surface by increasing the surface area of the bonding zone.
Note：Please leave your email, our professional person will contact you asap!
