The M16 180mm PCD crossover diamond grinding cup wheel is designed for super fast removing hard and tacky surface coating including urethane epoxy, paint, glue, pool deck coating, waterproofing membrane, thick mastic,VCT mastic, black tar adhesive, old and new epoxy coating, as well as thick rubber materials on the concrete floor.
Husqvarna Redi-Lock with 1 Full PCD and 1 Button with Split PCD is a high-performance “hybrid” removal tool. It is essentially a triple-action shoe designed for the most difficult surface preparation jobs where you need both aggressive removal and a smoother finish than a standard PCD can provide.
It features arrow-shaped diamond segments, designed for quickly grinding concrete surfaces and removing epoxy resin, adhesives, and coatings.
The sharp edged PCD crossover diamond grinding cup wheel is designed for super fast removing hard and tacky surface coating including urethane epoxy, paint, glue, pool deck coating, waterproofing membrane, thick mastic,VCT mastic, black tar adhesive, old and new epoxy coating, as well as thick rubber materials on the concrete floor.
The ten-segment grinding tool is made of high-quality diamond grinding material, which is evenly embedded in each cutting segment. The rounded blade edge design minimizes scratches to the maximum extent, extends service life, and boasts excellent durability and grinding performance. The metal cutting segments are suitable for both wet and dry operations, while the ten-segment end face design provides the optimal chip or slurry discharge channel.
Email：
contact@hldiamondtools.com
Concrete metal bond diamond puck Size : 76mm
Segment:5T,6T,8T,10T Or customized as requested
Segment height: 8/10/12mm or upon request
Grit: 6#, 16/20#, 30/40#, 60/80#, 120# grit or made as your demand
Bonds Available:Extreme soft /Soft/ Medium/ Hard/ Extreme hard Or customized as requested
Backing system: Fast Change System
Working type: Wet grinding / Dry grinding
Long lifetime
Concrete Grinding Disc Main Uses and Features:
1.Wide Range of Applications: This grinding disc is primarily used for grinding, leveling, and polishing the surfaces of hard non-metallic materials such as concrete, stone, granite, and marble.
2.Efficient Material Removal: The beveled segmented design (such as the 10-segment or 6-segment design shown in the image) has strong grinding power, enabling quick removal of old coatings, adhesives, epoxy resin, and uneven areas on the floor.
3.Reduced Scratches: The beveled design helps minimize scratches during the grinding process, providing a smoother surface finish.
4.Suitable for Dry and Wet Use: The grinding segments with metal bonding allow it to be used in both dry and wet grinding applications. Wet grinding typically helps extend tool life and provides a more aggressive grinding effect.
5.Compatibility: It is usually mounted on angle grinders or large floor grinders for use in large-area applications as well as hard-to-reach areas such as edges and corners.
Note：Please leave your email, our professional person will contact you asap!
Keywords: CW505、CW507、Class B water mill、7-inch turbine 30
