Trapezoid more small segment grinding disc are designed specifically for the quick Change system. The five V-shaped diamond segments providing a balance between aggressive cutting and a stable, smooth finish.
PRODUCTS
HOT PRODUCTS
“PCD Plug WITH 3 PCDs are designed to remove coating over a surface equal to a troweled surface and will not damage the concrete. One of the 3 PCDs act as a stabilizer and depth guide, and reduce the gauging of the floor caused by the aggressive pcd segments. Diamond plug for Floorex grinder, with different shapes segments. But what is more important, especially in the initial grinding steps, is the bond or hardness of the tools. “
3×1/4PCD Diamond Trapezoid Grinding Disc Excellent for all kinds of hard-to-remove coatings, adhesives and screeds, such as epoxy, glues and paint. Suitable for Iron Horse, Xingyi, ASL Floor Grinder
Standard Trap with 2 Quarter PCD and 2 Button is a high-performance removal tool. It is designed for the surface preparation jobs where you need both aggressive removal and a smoother finish than a standard PCD can provide.
180mm 9 PCD Chip grinding cup wheel, Professional coating removal Grinding Disc, For Fast Aggresive Epoxy, Paint, Glue Removal.
The 9 PCD chip grinding cup wheel is designed for fast removing hard and tacky surface coating including urethane epoxy, paint, glue, ,waterproofing membrane,pool deck coating, thick mastic, old and new epoxy coating,VCT mastic, black tar adhesive as well as thick rubber materials on the concrete floor.
Email：
contact@hldiamondtools.com
HuanLong 9 PCD chip Diamond Grinding Disc for Epoxy Glue Coating Removal
PCD Grinding CUP WHEEL
Application: Huanlong PCD9″ 1/8 PCD segment Grinding cup wheel is excellent choice for remove medium/heavy epoxy ,coatings mastic and glues. Using the highest quality polycrystalline diamonds to rapidly lift material. It’s scraping action eliminates gumming up of segments and maximizes production. Using small size 1/8 PCD Chip to minimize damage/gouging in the floor when removing glues and mastics.The super aggrisive PCD segment performsexcellent effciency compare to tradional abrasive diamond tooling, super fast action on common coatings such as epoxy, mastic, glue, bitumen and resin. Standard 22.23mm bore is perfect for using on hand holded angle grinders for coating removal jobs.
Various types of base cup wheel optionsavailable for different angle grinders, please contact us for availability and detail.
Segment number: available for 12, 15 or 24 segments or upon request.
Size: 100mm/4″, 115mm/4.5″,125mm/5″, 180mm/7″, or upon request.
Bore size: 22.23mm, M14 ,5/8″- 11 or upon request
Extremely aggressive for rapid coating removal process
Working type: Dry grinding / Wet grinding
Note：Please leave your email, our professional person will contact you asap!
