Standard center holes (7/8 inch or 22.23 mm) grinding disc allow installation onto the chucks of most consumer and professional angle grinders. The surrounding pattern of holes is used to connect various types of grinding discs or grinding heads.
PRODUCTS
HOT PRODUCTS
It can be easily slid into the grinding disc of the Scanmaskin machine without the need for bolts and is part of its “Quick Change” (ScanOn) system. Used for grinding, leveling concrete, terrazzo, and stone floor surfaces.Highly efficient in removing old coatings, adhesive residues, epoxy resins, and paints, etc.
PCD Segment – 6 HolesTrapezoid PCD’s are great for thick coating removal, very aggressive. For best results remove bulk of coating without continued contact with concrete. Come back with an aggressive metal bond diamond segment and clean up any thin coating left behind. This will help preserve the life of the PCD segments.
“Feasures: 1) Application: These triangle shaped grinding cup wheel are great for any type of concrete construction work. They can also be used for aggressive stone removal, such as concrete, hard granite, marble, engineered stone, terrazzo etc 2) 22.23mm arbor; Flange with thread M14 or 5/8″”-11available 3) Coarse, medium and fine grit on request 4) Aggressive grinding with long lifetime 5) Application:Concrete,granite,marble stones”
180mm sharp edged PCD low profile grinding cup wheel, Professional coating removal Grinding Disc, 9* 1/4 PCD segments, For Fast Aggresive Epoxy, Paint, Glue Removal.
The sharp edged PCD low profile diamond grinding cup wheel is designed for super fast removing hard and tacky surface coating including urethane epoxy, paint, glue, pool deck coating, waterproofing membrane, thick mastic,VCT mastic, black tar adhesive, old and new epoxy coating, as well as thick rubber materials on the concrete floor.
Email：
contact@hldiamondtools.com
HuanLong sharp edged PCD low profile Diamond Grinding Disc with large cooling holes, 9 *1/4 PCD segments for Epoxy Glue Coating Removal
PCD Grinding CUP WHEEL
Application: Huanlong sharp edged PCD segment Diamond Grinding cup wheel with large coolling holes is a professional grade coating removal tool, The special designed sharp edged PCD segment makes this PCD cup wheel extra aggrisive than normal PCD segment. Low profile style disc for easier handling on angle grinder. Using the highest quality polycrystalline diamonds to rapidly lift material, performing outstanding effciency compare to tradional abrasive diamond tooling, rapid action on common coatings such as epoxy, glue, mastic, bitumen and resin. Standard 22.23mm bore is perfect for fitting hand holded angle grinders for coating removal jobs.
Various types of base cup wheel optionsavailable for different angle grinders, please contact us for availability and detail.
Size: 100mm/4″,125mm/5″, 180mm/7″, or upon request.
Bore size: 22.23mm, M14 ,5/8″- 11 or upon request
Extremely aggressive for rapid coating removal process
Working type: Dry grinding / Wet grinding
Note：Please leave your email, our professional person will contact you asap!
