“PCD grinding plates are used for fast removing all types of coatings such as paint, varnish, glue, epoxy, acrylic, screed residue, VCT mastic, black tar adhesive as well as thick rubber materials on the concrete floor. “
PRODUCTS
HOT PRODUCTS
Huanlong 2 Crossover Oval segments Redilock grinding shoes are specifically designed for high-efficiency floor prep and aggressive coating removal.
The 7″ sharp edged PCD segments diamond grinding cup wheel is designed for fast removing hard and tacky surface coating including urethane epoxy, paint, glue, pool deck coating, waterproofing membrane, thick mastic,VCT mastic, black tar adhesive, old and new epoxy coating, as well as thick rubber materials on the concrete floor.
Trapezoid Grinding Shoes features a “quick-change” base installed on the rotating discs of large grinding machines to process the surfaces of concrete, terrazzo or stone.
Trapezoid PCD 1/4 shape Grinding Shoes PCD Tools High Performance on Thin-to-Medium Coatings For for epoxies, acrylics, and mastics that are under 3mm thick.
The Redi-Lock with 3×1/4 PCD & 1 Bar Segment is a precision removal tool that combines the aggressive “shredding” power of multiple PCD chips with the stability of a metal-bond diamond bar.It is arguably the most balanced tool in the Redi-Lock PCD family, designed specifically to avoid the “all-or-nothing” aggressiveness of larger PCDs.
Email：
contact@hldiamondtools.com
Trapezoid PCD diamond grinding shoes 3*1/4PCD with 1 bar shaped
HuanLong Redilock PCD grinding shoes, it is manufactured with 3 PCD plus diamond bar. Maximum contact and usage of the diamond while working over rough surfaces. Trapezoid PCD is the great choice for removing thick coatings.
3×1/4 PCDs: Instead of one large scraper, you have three smaller contact points. This creates more “shaving” actions per rotation, which is more effective at removing brittle or flaky coatings without causing the machine to jump or vibrate.
The 1-Bar Segment: This is a diamond-infused metal bar that acts as a depth gauge and stabilizer. It prevents the PCD chips from digging too deeply into the concrete, ensuring you only remove the coating and a tiny fraction of the substrate.
This tool of 3×1/4PCD with 1bar is the “insurance policy” for your concrete slab.
• Reduced Gouging: Unlike a “Naked PCD” (one with no bar), this tool won’t leave deep, swirling “trench” marks in the concrete. This is critical if you plan to polish the floor later.
• Consistency: The single bar ensures the head stays flat. It provides a light grind while the PCDs do the heavy lifting, cleaning up the residue in the same pass.
• High Performance on Thin-to-Medium Coatings: It is the ideal choice for epoxies, acrylics, and mastics that are under 3mm thick.
Note：Please leave your email, our professional person will contact you asap!
