Magnetic grinding shoes with three round segments are readily available for use on concrete and terrazzo floors. These tools are often used for medium to fine grinding, offering durability and a smooth finish.
PRODUCTS
HOT PRODUCTS
For use on grinding machine to adapt different types of diamond grinding shoes. Eg: 250mm universal Magnetic grinding plate with LAVINA grinding shoe slots, Magnetic Klindex plate for Tarpzoid grinding shoes, HTC magnetic plate with Trapzoid grinding shoe slots, etc.
The M16 7inch 9 PCD grinding cup wheel, 9* 1/4 PCD segmen is designed for fast removing hard and tacky surface coating including urethane epoxy, paint, glue, waterproofing membrane,pool deck coating, thick mastic,VCT mastic, black tar adhesive, old and new epoxy coating, as well as thick rubber materials on the concrete floor.
Single Pin grinding shoes is preferred for its balance between aggressive cutting and a smooth finish, have high strength, excellent wear resistance, and a low friction coefficient. Metal bond diamonds high grinding efficiency and low wear.
Lavina Double PCD with Single Bar Segment for Epoxy Removing
Lavina X PCD with bar are designed for thin mil coating removal, mastic removal, and for the first steps in polishing. Beveled tooling that allows for easy ‘slide in’ action on your concrete grinders. These tools are universal to 3 pin screw systems as well. PCD’s are typically used to remove prior coatings and glue.
Email：
contact@hldiamondtools.com
Epoxy PCD Metal Bond Diamond Tool for Concrete Coating Removal Lavina Grinder
HuanLong PCD grinding shoes are used for fast removing all types of coatings such as paint, varnish, glue, epoxy, acrylic, screed residue, VCT mastic, black tar adhesive as well as thick rubber materials on the concrete floor. Redi Lock is easy and quick set up of diamond tools, no need for multiple sets of diamond holder discs and no time consuming. Available for a variety of machine manufacturers.
About Segments:
a.PCD without sacrificial bars or metal bond button are very aggressive, and will leave a very coarse profile on the concrete. They are suitable for fast and aggressive grinding, removal coating thicker than 3mm.
b.PCD with sacrificial bars or metal bond button are less aggressive, so they do not damage the concrete.The sacrificial bars or metal bond button act as a depth guide, and reduce the gauging of the floor cause by the aggressive PCD segments. Moreover, the metal bond will extend the life of PCD.
Working type: Dry grinding / Wet grinding
HuanLong can offer all kinds of trapezoid PCD to fit all types of machines. The universal three holes fit most plates. (Please contact us for options and details.)
Note: The PCD coating removal tool is directional specific and you should check the rotation direction of the grinder heads.
Note：Please leave your email, our professional person will contact you asap!
