“For easy installation of velcro back resin floor polishing pad onto floor grinding machine. Eg: REDILOCK, LAVINA, HTC, SKINMAKIN, SWITCH, STI, etc. “
PRODUCTS
HOT PRODUCTS
Magnetic grinding shoes featuring three Arrow segments are high-performance tools designed for the M9 Magnetic system. By using three segments instead of one or two large ones, these shoes increase the number of “leading edges,” which allows for a more aggressive cut while maintaining a smooth finish.
The PCD diamond grinding cup wheel is designed for fast removing hard and tacky surface coating including urethane epoxy, paint, glue, waterproofing membrane,pool deck coating, thick mastic, old and new epoxy coating,VCT mastic, black tar adhesive as well as thick rubber materials on the concrete floor.
“PCD Plug WITH 3 PCDs are designed to remove coating over a surface equal to a troweled surface and will not damage the concrete. One of the 3 PCDs act as a stabilizer and depth guide, and reduce the gauging of the floor caused by the aggressive pcd segments. Diamond plug for Floorex grinder, with different shapes segments. But what is more important, especially in the initial grinding steps, is the bond or hardness of the tools. “
Lavina Double 1/4 PCD with Single Bar Segment for Epoxy Removing
Lavina X PCD with bar are designed for thin mil coating removal, mastic removal, and for the first steps in polishing. Beveled tooling that allows for easy ‘slide in’ action on your concrete grinders. These tools are universal to 3 pin screw systems as well. PCD’s are typically used to remove prior coatings and glue.
Email：
contact@hldiamondtools.com
Epoxy PCD Metal Bond Diamond Tool for Concrete Coating Removal Lavina Grinder
HuanLong PCD grinding shoes are used for fast removing all types of coatings such as paint, varnish, glue, epoxy, acrylic, screed residue, VCT mastic, black tar adhesive as well as thick rubber materials on the concrete floor. Redi Lock is easy and quick set up of diamond tools, no need for multiple sets of diamond holder discs and no time consuming. Available for a variety of machine manufacturers.
About Segments:
a.PCD without sacrificial bars or metal bond button are very aggressive, and will leave a very coarse profile on the concrete. They are suitable for fast and aggressive grinding, removal coating thicker than 3mm.
b.PCD with sacrificial bars or metal bond button are less aggressive, so they do not damage the concrete.The sacrificial bars or metal bond button act as a depth guide, and reduce the gauging of the floor cause by the aggressive PCD segments. Moreover, the metal bond will extend the life of PCD.
Working type: Dry grinding / Wet grinding
HuanLong can offer all kinds of trapezoid PCD to fit all types of machines. The universal three holes fit most plates. (Please contact us for options and details.)
Note: The PCD coating removal tool is directional specific and you should check the rotation direction of the grinder heads.
Note：Please leave your email, our professional person will contact you asap!
