Huanlong Low profile Turbo diamond grinding cup wheel, For fast and aggresive grinding hard material such as concrete, Terrazzo, Engineered Stone, granit, marble and etc.
PRODUCTS
HOT PRODUCTS
Redi-Lock with 2 Square PCD refers to a specific type of floor grinding tool designed for the Husqvarna Redi-Lock quick-change system. These tools are high-performance “scrapers” used primarily for the aggressive removal of tough floor coatings rather than standard concrete grinding.
Double Quarter Round PCD With 1 Segment Best Use For Epoxies, acrylics, paints, and thicker glues/mastics. Ideal for 1mm to 2mm thick coatings. Works well on both small single-head (PG 280) and medium planetary (PG 450/530) machines.
SASE double button grinding shoes used with concrete floor grinders, they are specifically designed to fit SASE and other compatible floor grinding machines for concrete surface preparation and polishing
The Redi-Lock with 1/2 PCD and 2 Arrow Segments For Thick, sticky coatings and hard concrete. Aggressive; deep mechanical bond profile.
The Redi-Lock with 1/2 PCD and 2 Arrow Segments is an elite heavy-duty removal tool. It combines the raw scraping power of a half-round PCD with the precision “slicing” of arrow-shaped diamond segments. This is a specialized configuration typically used when you need to strip a thick, stubborn coating and prep the concrete for a new high-build system in a single pass.
Email：
contact@hldiamondtools.com
Trapezoid Half PCD w/ Double Arrow Coating Removal PCD Diamond Grinding Segment Concrete Tools
1. The Power of the “Arrow” Design
Unlike standard rectangular bars, Arrow Segments have sharp, pointed leading edges.
Slicing Action: While a standard bar grinds, the arrow “slices” into the coating residue. This is particularly effective for sticky adhesives (mastic, glue) that might otherwise smear under a flat bar.
Reduced Friction: The tapered shape allows the segment to penetrate the surface more easily, providing a more aggressive bite into the concrete substrate.
2. Why the “1/2 PCD + 2 Arrow” Combo?
This setup is designed for heavy-duty production:
Maximum Shredding: The 1/2 PCD chip acts as the primary “shredder,” tearing through thick epoxy, urethane, or waterproof membranes.
Double Stability: Two arrow segments provide a wider footprint than a single bar. This keeps the grinding head perfectly level, preventing the machine from “walking” or vibrating excessively when hitting uneven patches.
Integrated Surface Prep: The two arrow segments are usually a very coarse grit (roughly 16–25 grit). As the PCD removes the coating, the arrows immediately begin grinding the concrete, leaving a high-profile surface that is ideal for bonding new materials.
Note：Please leave your email, our professional person will contact you asap!
