Sase Removal Tools Composed Of One PCD Diamond Segment And One Bar-Shaped Segment. It is use for floor coating removal, epoxy, and paint grinding. It is widely used in many grinding applications,like removing of epoxy, glue, and resin off of concrete floor.
Huanlong Low profile Turbo diamond grinding cup wheel, For fast and aggresive grinding hard material such as concrete, Terrazzo, Engineered Stone, granit, marble and etc.
Unlike the standard 2-segment shoes used for general grinding, the 5-round segment configuration is engineered for fast, aggressive material removal and fine surface finishing due to its larger surface area and unique pressure distribution.
The 7 inch Air cool 6 PCD segments diamond grinding cup wheel is designed for fast removing hard and tacky surface coating including urethane epoxy, paint, glue, ,waterproofing membrane,pool deck coating, thick mastic, old and new epoxy coating,VCT mastic, black tar adhesive as well as thick rubber materials on the concrete floor.
The Redi-Lock with 5×1/4 PCD and One Bar is an extremely high-production tool designed for heavy-duty coating removal. It is essentially a “high-density” scraper that offers more cutting points than the standard double-PCD models.
Email：
contact@hldiamondtools.com
Aggressive PCD for Carpet Glue Removal Concrete Grinding Disc / diamond grinding shoes / grinding block is typically used in floor grinders for grinding concrete, terrazzo, or stone surfaces, removing old coatings, epoxy resins, and adhesives, as well as leveling uneven areas.
1.Standard PCD shoes usually have one or two large segments. This tool By having five separate segments, the tool has more leading edges to “catch” and lift the coating. This makes it significantly faster at removing stubborn materials.
• Reduced Friction: Smaller segments create less surface drag than one massive square segment, allowing your grinder to maintain higher RPMs even under heavy loads.
• Aggressive Shredding: It doesn’t just scrape; it effectively shreds the coating into smaller chips, which helps prevent your vacuum system from clogging with large “ribbons” of epoxy or mastic.
2. The Stabilizing Bar (The Middle Guard)
Because five PCDs are incredibly aggressive, the metal-bond bar in the middle is essential for control.The bar functions as a ‘floor’ or depth stop, preventing the five sharp PCDs from diving too deeply into the concrete—a significant risk with high-segment counts. The metal bar aids in pulling heat away from the PCD tips, helping extend the tool’s life during extended use. As the PCDs cut through the coating, the metal bar simultaneously performs a light ‘first-cut’ grind on the concrete, clearing away residue immediately.
3. Best Use for Heavy Coatings (>3mm): Multiple layers of old epoxy, thick waterproof membranes, or pool deck coatings. Difficult Adhesives: Thicker mastics or high-build glues that standard diamonds would simply smear. Uneven Concrete: The multiple points of contact allow the tool to ride over “waves” in the concrete more effectively than a single large segment.
4. Directionality: Like all PCDs, these are directional. You must verify if your machine needs Clockwise (CW) or Counter-Clockwise (CCW) rotation.
Note：Please leave your email, our professional person will contact you asap!
Keywords: CW505、CW507、Class B water mill、7-inch turbine 30
