“Arrow segment” Klindex rings are diamond grinding tools designed for use with Klindex floor grinding machines, specifically for aggressive concrete floor preparation and coating removal. The “arrow” profile of the diamond segments helps to scrape and rip coatings from the surface without loading up or smearing.
The 180mm sharp edged PCD chip grinding cup wheel is designed for fast removing hard and tacky surface coating including urethane epoxy, paint, glue, waterproofing membrane,pool deck coating, thick mastic,VCT mastic, black tar adhesive, old and new epoxy coating, as well as thick rubber materials on the concrete floor.
Huanlong Swirl diamond polishing pad for fast Wet or dry polishing materials such as concrete, Granite, marble, Terrazzo, Engineered Stone, Porcelain, Quartz.
Maximum 4000RPM
Fast removal of thick coating such as old glue, epoxy, paint, in particular thick resins.
Creates slip-resistant finish on granite and marble, breaks down coatings prepares surface for application of new coating overlay, enhances the combination of floor and new layer material.
The Redi-Lock with 3×1/4 PCD & 1 Bar Segment is a precision removal tool that combines the aggressive “shredding” power of multiple PCD chips with the stability of a metal-bond diamond bar.It is arguably the most balanced tool in the Redi-Lock PCD family, designed specifically to avoid the “all-or-nothing” aggressiveness of larger PCDs.
Email：
contact@hldiamondtools.com
Trapezoid PCD diamond grinding shoes 3*1/4PCD with 1 bar shaped
HuanLong Redilock PCD grinding shoes, it is manufactured with 3 PCD plus diamond bar. Maximum contact and usage of the diamond while working over rough surfaces. Trapezoid PCD is the great choice for removing thick coatings.
3×1/4 PCDs: Instead of one large scraper, you have three smaller contact points. This creates more “shaving” actions per rotation, which is more effective at removing brittle or flaky coatings without causing the machine to jump or vibrate.
The 1-Bar Segment: This is a diamond-infused metal bar that acts as a depth gauge and stabilizer. It prevents the PCD chips from digging too deeply into the concrete, ensuring you only remove the coating and a tiny fraction of the substrate.
This tool of 3×1/4PCD with 1bar is the “insurance policy” for your concrete slab.
• Reduced Gouging: Unlike a “Naked PCD” (one with no bar), this tool won’t leave deep, swirling “trench” marks in the concrete. This is critical if you plan to polish the floor later.
• Consistency: The single bar ensures the head stays flat. It provides a light grind while the PCDs do the heavy lifting, cleaning up the residue in the same pass.
• High Performance on Thin-to-Medium Coatings: It is the ideal choice for epoxies, acrylics, and mastics that are under 3mm thick.
Note：Please leave your email, our professional person will contact you asap!
Keywords: CW505、CW507、Class B water mill、7-inch turbine 30
